Gem Cutting Table

English	français

Gem Cutting Table
(Building)
Location
Compound
Size
17 × 17
Requirements
Gem Cutting
Cost to Build Rope 30 Steel Wire 12 Brass Small Gears 6 White Sand 6 Cut Stone 3

Sources

This building becomes available after you have learned the Gem Cutting skill. They are used to shape cuttable gems into various Cut Gems.

Gem Cutting Tables cannot be rotated during placement.

If you have a Specimen Case (a pre-order special item) you can place a partially cut gem in the case and work on it later.

• Have the Specimen Case in your inventory
• Work the gem until you are ready to stop
• Select Finish Cutting and scroll to the end of the list and select: Unique Specimen
• You will be given a box to name it e.g. BlockHeadCut
• It will show in your inventory with this name and replaces the Specimen Case in your inventory
• When you load the gem into the table again your specimen case will return to your inventory

Cost

• 6 Brass Small Gears
• 3 Cut Stone
• 6 White Sand
• 30 Rope
• 12 Steel Wire

Built in a Compound. Uses 17x17 cells.

Upgrade with Fine Balance

• 2 Queen's Tomb Sunstones Tc:Fine Balance

Adds a balance to a gem cutting table, measuring a gem's weight.

Upgrade table to Fracture Gems

• Requires 1 Gem Shearing Chisel, 5 Iron Bars, 10 Bolt, 10 Washer

This upgrade option is only available if you know Fine Balance

Once installed, it allows you to fracture large gems into between 0 and 7 smaller gems. The amount is random each time you fracture the gem.

T8 Known Issues

The gem cutting table catalog displays all of the standard gem cuts. T8 known issue is the Choronzon gem displays twice in the listing. It is the same cut. This will not be fixed for T8.

Use

Allows cutting of Cuttable Gems into Cut Gems of various types.

Cutting gems consists of trying to cut a semi-randomly shaped gem into a specific pattern. There is no room for error and the final product must be 100% accurate. The gem is cut by rotating the gem on its X,Y, or Z axis as needed, and cutting it with 1 of 3 blades on the table. The blades, and the type of cut they apply, are shown in the image below.

Tip

There are a number of hotkeys that move the gem. The mouse must be at the junction of the gem and the table for the hotkeys to work.