Difference between revisions of "Carpentry Blade"
| Line 33: | Line 33: | ||
Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest. | Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest. | ||
| − | The classic reference for making a 7k+ carp blade in 23 hits is shown at the T8 [https://atitd.wiki/tale8/Guild:The_Lollipop_Guild/CarpGuide | + | The classic reference for making a 7k+ carp blade in 23 hits is shown at the T8 [https://atitd.wiki/tale8/Guild:The_Lollipop_Guild/CarpGuide The Lollipop Guild's CarpGuide] page. |
An alternate, animated guide is available from the Tale IV [http://www.atitd.org/wiki/tale4/Guilds/Coastal_Plains/Carpentry Coastal Plains] Guild. | An alternate, animated guide is available from the Tale IV [http://www.atitd.org/wiki/tale4/Guilds/Coastal_Plains/Carpentry Coastal Plains] Guild. | ||
Revision as of 03:53, 4 November 2019
| Carpentry Blade | ||
|---|---|---|
 |
||
| (Item) | ||
|
||
|
Sources
Carpentry blades are metal blades installed in a Carpentry Shop to enable the cutting of boards and the making of a sledgehammer. Blades are made on an Anvil, and like all products made with blacksmithing, each has its own quality rating from 0 to 9999.
Cost
Use
Carpentry blades eventually wear out as they are used to cut boards. Higher quality blades will last longer. A blade must be of quality 3000 or higher to be used in a Carpentry Shop.
- 1?? quality 3000+ to upgrade Carpentry Shop
- 1?? quality 3500+ to make a Raeli Mosaic
- 2?? quality 6000+ to make a Raeli Oven
Research and Tuition
- 50?? needed to research Raeli Pottery (25?? Q5000+, 10?? Q6000+, 5?? Q7000+, 10?? Q8000+)
- 500?? 5000+ Quality required for Loom Automation research
Required By
Automatic Loom, Automatic Loom, Carpentry Shop, Raeli Mosaic, Raeli Pottery
Produced By
Smithing a Carpentry Blade
Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest.
The classic reference for making a 7k+ carp blade in 23 hits is shown at the T8 The Lollipop Guild's CarpGuide page.
An alternate, animated guide is available from the Tale IV Coastal Plains Guild.
Quality and Durability
Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomalies does to the random element in the function determining how many boards a blade will last for. --Narafeti
Quality - Boards
- 3000(1) - 131
- 3000(2) - 114
- 3509 - 215
- 3785 - 237
- 4731 - 306
- 5556 - 395
- 6000 - 444
- 6502 - 516
- 6555 - 518
- 7000 - 555
- 7168 - 574
- 7353 - 619
- 7500 - 611
- 7609 - 721
- 7495 - 610
- 7490 - 625
- 7000 - 555
- 7201 - 579
- 6999 - 603
- 7199 - 593
- 7601 - 625