A Wiki in the Desert
Log in

Difference between revisions of "Carpentry Blade"

From A Wiki in the Desert
Line 40: Line 40:
  
 
Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomalies does to the random element in the function determining how many boards a blade will last for. --Narafeti  
 
Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomalies does to the random element in the function determining how many boards a blade will last for. --Narafeti  
 +
 +
Note that Carpentry Shops now plane multiple boards per cycle, based on your Carpentry skill. These numbers are probably correct for cycles --Samruc
  
 
Quality  -  Boards   
 
Quality  -  Boards   

Revision as of 08:49, 30 April 2021



Carpentry Blade
Carpentry Blade
(Item)
Weight 1
Bulk 1


Sources

Carpentry blades are metal blades installed in a Carpentry Shop to enable the cutting of boards and the making of a sledgehammer. Blades are made on an Anvil, and like all products made with blacksmithing, each has its own quality rating from 0 to 9999.

Cost

Use

Carpentry blades eventually wear out as they are used to cut boards. Higher quality blades will last longer. A blade must be of quality 3000 or higher to be used in a Carpentry Shop.

Research and Tuition

  • 50?? needed to research Raeli Pottery (25?? Q5000+, 10?? Q6000+, 5?? Q7000+, 10?? Q8000+)
  • 500?? 5000+ Quality required for Loom Automation research

Required By

Automatic Loom, Automatic Loom, Carpentry Shop, Raeli Mosaic, Raeli Pottery

Produced By

Anvil

Smithing a Carpentry Blade

Carpentry blades are probably the easiest products to shape on an anvil, and are certainly the cheapest.

The classic reference for making a 7k+ carp blade in 23 hits is shown at the T8 The Lollipop Guild's CarpGuide page.

An alternate, animated guide is available from the Tale IV Coastal Plains Guild.

Quality and Durability

Below is some research on exactly how long certain quality blades lasted in use. These prove that boards per blade has a random element (the first two blades were exactly 3000q and planed significantly different numbers of boards). In general, better quality blades plane more boards. In a narrow range there will be anomalies does to the random element in the function determining how many boards a blade will last for. --Narafeti

Note that Carpentry Shops now plane multiple boards per cycle, based on your Carpentry skill. These numbers are probably correct for cycles --Samruc

Quality - Boards

  • 3000(1) - 131
  • 3000(2) - 114
  • 3509 - 215
  • 3785 - 237
  • 4731 - 306
  • 5556 - 395
  • 6000 - 444
  • 6502 - 516
  • 6555 - 518
  • 7000 - 555
  • 7168 - 574
  • 7353 - 619
  • 7500 - 611
  • 7609 - 721
  • 7495 - 610
  • 7490 - 625
  • 7000 - 555
  • 7201 - 579
  • 6999 - 603
  • 7199 - 593
  • 7601 - 625