Flower Genome Theories

General Color Theory in all flowers

• Primary colors: Cyan, Magenta, Yellow

Cyan Shade 1............Shade 2............Shade 3............Shade 4

Magenta Shade 1............Shade 2............Shade 3............Shade 4

‎

Yellow Shade 1............Shade 2............Shade 3............Shade 4

• Secondary colors: Blue, Green, Red
  • Red = Magenta + Yellow
  • Green = Cyan + Yellow
  • Blue = Cyan + Magenta

Blue Shade 1............Shade 2............Shade 3............Shade 4

Green Shade 1............Shade 2............Shade 3............Shade 4

Red Shade 1............Shade 2............Shade 3............Shade 4

• Other color combinations
  • Black = Cyan + Magenta + Yellow (Grey is only a light black in color terms)
  • Orange = Magenta + Yellow + Yellow

See Sea Lily Colors for a general color reference chart.

• https://www.atitd.org/wiki/tale4/Sea_Lily_Colors

GENE NAMES ARE THE NAMES OF COLORS NOT THE COLORS THEMSELVES. AS AN EXAMPLE, DO NOT CONFUSE THE GENE NAME Orange or the abbreviated gene name O with the color orange.

• 4 Shades of a primary color exist which produce progressively richer and denser coloring from 1 to 4. Notation is Colorx where x=1 to 4 shades.
  • Example: Mag2 = Two shades of Magenta in a sea lily = GOOO GOOO

When x is used in a notation such Uxxx, each x must equal the same gene name, like URRR or UOOO or IYY.

The color key codes for x can be different for each flower type! So check carefully.

Orchid Genome Theory

Updated for T8 Gene Colors: (A)mber, (V)iolet, (R)ed, (I)ndigo, (P)ink, (L)avender, (T)urquoise

"V" is a separator, it does nothing but prevent overlaps of gene sets.

• Color gene sets
  • Lx for the stem
  • xL for the leaves
  • Pxx for main petals
  • Px for upper petal
  • xP for front petal
  • xxx or LPx for lower petals.

• Color key for x
  • x=I for cyan
  • x=T for magenta
  • x=A for yellow

• Size gene sets
• PITA for giant
• ATIP for dwarf
• Giant and Dwarf genes cancel each other out exactly so there are no half dwarves/giants.
• https://atitd.wiki/tale8/User:Rania/Orchids#Orchid_Genome_Theory

Rose Genome Theory

Updated for T8 Gene Colors: (A)mber, (R)ed, (I)ndigo, (P)ink, (L)avender, (T)urquoise

• Petal color gene sets
  • Pxx = Outer Petal
  • xxP = Inner Petal

• Petal color key
  • I=Cyan
  • T=Magenta
  • A=Yellow

• Stamen and leaves gene sets
  • xL = Stamen
  • Lx = Leaves

• Stamen and leaves color key
  • P=Cyan
  • I=Magenta
  • T=Yellow

Size is encoded as below:

PITAL = Giant x 1
LATIP = Dwarf x 1
I don't believe Giant is x1, a 2xDwarf + 1xGiant is not the same size as a 1xDwarf, but a bit smaller. /McArine
A rose which is 3xGiant + 1xDwarf is the exact same size as a rose with no size modifiers. /Peacefulness, T10

The number of fertilizations it takes to split is independent of genome and randomly assigned to each individual flower when it is planted.

• https://atitd.wiki/tale8/User:Rania/Rose#Rose_Of_Ra_Genome_Theory

Sand Bloom Genome Theory

Updated for T8 Gene Colors: A(Z)ure, (A)mber, (V)iolet, (R)ed, (I)ndigo, (P)ink, (L)avender, (T)urquoise

• Color gene sets
  • xA for right outer petal
  • Ax for left outer petal
  • Lx for upper inner petal
  • xL for lower inner petal
  • Vx for the center ring
  • xV for the inner circle

• Color key for x
  • I = magenta
  • T = yellow
  • P = cyan

• Size gene sets
  • PITA for giant
  • ATIP for dwarf
  • Normal size = 0 (size of Sacrifice or Sunshine)
    • Giant gene set = PITA = +1 (size of Calliope)
    • Dwarf gene set = ATIP = -3 (Petit Mal is dwarfx2)

click the image for other available sizes

• • The calculations for giant and dwarf fell apart when I created a 3 giant 2 dwarf sandbloom.
    • 3 giant 1 dwarf is the same size as a flower with no size modifiers
    • 3 giant 2 dwarf is not the same size as 1 dwarf (which is what I expected). It is the size of 1 giant, 1 dwarf.
    • more testing to come!

'Z' is a spacer to separate color coding as on Lemon Drop it keeps TA and TL from becoming AT and LT.

• https://atitd.wiki/tale8/User:Rania/Sand_Bloom#Sand_Bloom_Genome_Theory

• Fertilization gene set
  • Known to exist in T8.
  • Apophis' Apology requires 20 fertilizations to bulb. Other sandblooms require 24 fertilizations. Genome not known.

Sea Lily Genome Theory

Updated for T8 Gene Colors: (A)mber, (V)iolet, (R)ed, (I)ndigo, (P)ink, (L)avender, (T)urquoise, (N)avy

Genomes separated into gene sets that affect the color, size and fertilization rate of a lily.

Blush APIP N AIII N LPII N VI N VII N VIII
Clarity VPVP VIVI VTVT AIPP APIP APPI AIPP APIP APPI
Crown LPII LPII LPII N LP N II N LP N IP N LPIP LPIP LPIP
Delicate VI VI VI VT VT VT ATIP
Dusk APIP AIPP LTTT ATIP VT APPI VTTT APPI AIPP APIP PITA VI APIP VIII VTT VT LPPP APPI AIPP LIII
Energy NNNNN LTTT LTTT ATTT ATTT APPI APPI LPIP LPIP NNNNN
Fracture PITA PITATIP AIP AIII (PITA and ATIP are merged but each affect the flower separately)
Morning VPPP VTTT VTTT LTTT LTTT LPIP LPIP APPP ATTT AIPP APPI
Silken PPPIIITTTAAALLLVVV
Vampire VT VT VI VT VI VI

Lily Color Gene Sets

• Stamen can be Vx(Outer Stamen) Vxx(Middle Stamen) or Vxxx(Inner Stamen) See Stamen Layering Note and color key for 'x'.

Note:Stamen Layering. Color shades increase on the separate stamen levels from upper(richest color) to lower(weakest shade) by combination of the gene sets. Example:

..........Vx 

..........Vx x 

..........Vx x x 

Shade      3 2 1 

• Inner East Petal Set Lxxx (see color Key below)
  • Example: xxx=PPP=Cyan
• Inner West Petal Set Lxyz
  • LIPP = Cyan
  • LPII = Magenta
  • LPIP = Yellow
• Outer South Petal Set Axxx (see color Key below)
  • Example: xxx=III=Magenta
• Outer North Petal Set Axyz
  • AIPP = Cyan
  • APIP = Magenta
  • APPI = Yellow

• Color key for x
  • P = Cyan
  • I = Magenta
  • T = Yellow

Note: Petal sets. There are 6 outer petals and 6 inner petals arranged around the stamen. A petal gene set colors 3 alternating petals. For example, the Outer North Petal Set consists of the north, southeast and southwest petals being colored grey on Clarity. The Inner West Petal Set consists of the west, northeast and southeast petals being colored red on Crown.

• https://atitd.wiki/tale8/User:Rania/Sealily#Sea_Lily_Genome_Theory

Size Gene Sets

Normal size = 0.0 (size of most original lilies)
Giant gene set = PITA = +0.5
Dwarf gene set = ATIP = -1.0 (size of Delicate)
Semidwarf = PITA(Giant) + ATIP(Dwarf) = +0.5 + (-)1.0 = -0.5 (size of Dusk)

Size Chart for Sea Lilies (Make sure your avatar is Very Tall to do this comparison-->Click Self/Appearance/Editor/Height Tab)

Normal.........................................Semi-Dwarf..........................................Dwarf

Dwarf x 2.......................................Dwarf x 3...............................................Dwarf x 4

• Note: How many different sizes still need to be determined T7 Found sizes between the above listed (Rania)

Fertilization Rate Gene Sets

Default lily fertilization rate = 48.
'N' gene reduces regular fertilization by 2.

• Example: Energy requires the least number of fertilizations because it contains ten(10) 'N' genes or 10 x 2 ferts less than the default of 48 fertilizations or just 28 ferts to split. See Genomes
• Note: 12 'N' genes is the maximum for reducing fertilizations. The 'Check the bulb for signs of budding' option on the flowers always appears after 24 fertilizations with basic Flower Fertilizer. More than 12 'N's in a sea lily does not continue to reduce fertilization to split rate.

What is possible with ATITD genetics? There are 125 possible color choices for flowers. Below are 60 of those choices ranging from the color white which is 0 Cyan shades 0 Magenta shades 0 Yellow shades to combining two of the primary colors up to shade 4 each.