Simple Bonfire

Bonfire
(Building)
Location
Outside
Requirements
Pyrolysis 0

Overview

A Bonfire is a pile of wood in the form of a building. Wood can be removed from, and added to, the bonfire at any time. The size of the bonfire varies depending on how much wood is in the pile.

Bonfires may be lit, which eventually consumes all of the wood and leaves behind a quantity of charcoal. This is a highly inefficient, if entertaining, method of charcoal production. Lit bonfires figure prominently in the Festival of Ra.

Not to be confused with the Sacrificial Bonfire used in the Test of the Vigil.

Sources

This building becomes available with Pyrolysis technology. It is built using the Projects -> Bonfire -> Basic Bonfire menu.

Bonfires are limited to 29,999 wood. Bonfires built outside deteriorate over time at the rate of 5% per day. Items including bonfires built on clay get a "subsiding" indicator and will shortly sink into the clay. Bonfires of less than 150 wood will deteriorate quickly and become eligible for the sweeper. Bonfires built inside a compound are not stable and also deteriorate. Only wood kept in a storage unit (box, chest, warehouse) is safe.

• a test bonfire of 200 wood built inside a compound deteriorated to nothing in less than 12 hours
  Zhukuram (talk) 02:52, 21 March 2018 (GMT)

Cost

Bonfires are made from wood gathered from trees.

• A maximum of 29,999 Wood per bonfire.
• Built Outside but deteriorate over time.
• Built Outside on clay will subside.
• Built in a Compound also deteriorate.

• Wood kept in a storage item does not deteriorate.

Use

Bonfires are commonly left unlit and used for very short-term wood storage. It is not recommended to leave a bonfire long term outside or in a compound as they will decay and eventually collapse. Place wood in a storage unit like a chest or warehouse.

Lit bonfires consume wood at an accelerating rate, until the wood level reaches zero; the fire dies shortly afterwards. As the flame burns, you can add Water to the bonfire to slow the rate of consumption; this helps the fire last longer, but doesn't seem to affect charcoal production.

You can tear down a bonfire while it is burning. This extinguishes the fire, and you will recover all of the wood that had not been burned yet. You will receive no charcoal for any wood that had been consumed.

Charcoal

The payoff for charcoal from bonfires seems to be extremely limited. It appears that yield is based on a very simple formula of #cc = #wood/10, with any remainder dropped. So, 10 wood will produce 1 cc, as will 11, 12, ... 19. 20-29 will produce 2 cc. And so on.

Here are some observed yields:

# wood	cc yield
7	0
10	1
14	1
20	2
30	3
35	3
42	4
49	4
50	5
56	5
63	6
100	10
250	25

Experience

Noticed that experience gathered from burning bonfires is not linearly proportional to amount of wood. Saw significantly less experience gained from burning a 250 wood bonfire (5 xp). A 20-wood bonfire gains 2 xp. A 50-wood bonfire gains 5 xp. As such, it seems a much better practice, since charcoal amounts are the same, to burn multiple smaller bonfires than one large one, to get to more efficient methods of making charcoal (with Pyrolysis advancement.)

It would appear that at Pyrolysis 1, the experience cap drops to 2xp per bonfire.

Size

I think it's not important for most of us, but here is the equation for wood needed for given size:

Wood = Size^2

Simple. For size 1 we need minimum 1 wood. To make the bonfire 1 size larger you need to add 3 wood for a total of 4 wood and so on...

Size	Wood
1	1
2	4
3	9
5	25
10	100
20	400
50	2500
100	10 K
200	40 K
300	90 K

Bonfire Stabilization

Bonfire Stabilization is a technology that allows you to build a Bonfire Platform upon which a non-decaying pile of wood may be stored.